Hampshire soft-wash roof cleaning specialists Call now: 023 8129 0232

Home  ›  Roof Cleaning  ›  Metal & Profiled Roofs

Metal & Profiled Roof Cleaning in Hampshire

Coated steel roofs and cladding on industrial units, workshops, farm buildings and commercial sites. Gentle cleaning that protects the coating.

Short answer: pre-finished metal roofs should be swept and washed gently, not jet washed. Tata Steel’s Colorcoat maintenance manual says to sweep debris with a soft-bristled brush, wash with clean water, avoid high-pressure jets, and use a mild detergent only if needed.

Who this is for

Owners and managers of units, warehouses, workshops, farm buildings, garages, sports clubs and schools with profiled or coated steel roofs and cladding. For blocks, estates and several sites, see commercial roof cleaning and the managing agents page.

Why metal roofs need cleaning

Rain washes most of a metal roof, but not all of it. Tata Steel’s manual names sheltered areas such as overhanging eaves and the area under solar panels as places that need cleaning by hand. Heavy debris in gutters can cause overflowing or ponding, which the manual links to corrosion. Moss and algae also build up where leaves and dirt collect.

How a careful metal roof clean works

  1. Debris swept off with soft brushes. Tata Steel advises against shovels and hard tools on the coating.
  2. Gutters and valley gutters cleared so water drains (gutter cleaning).
  3. A low-pressure wash with clean water, and a mild detergent or the coating maker’s recommended product only where needed.
  4. A note of coating damage or rust, such as cut-edge corrosion, with photos for your maintenance file.

Clean when dirt is visible, not out of habit: that is the manual’s own advice. Keep a record of each clean for any coating guarantee.

Safety: fragile roofs and rooflights

HSE says all roofs should be treated as fragile until a competent person confirms otherwise. Rooflights, non-reinforced fibre-cement sheets, liner panels and corroded metal sheets are among the surfaces it lists as likely to be fragile. Its first priority is to keep people off fragile surfaces, for example by working from a mobile elevating work platform below. Ask the contractor for a risk assessment and method statement before work starts. See insurance and certificates and access options.

Older profiled roofs may be fibre cement, not metal. Sheets fitted before 2000 may contain asbestos and need a survey before any cleaning.

Price

Metal and commercial roofs are quoted individually in writing from photos or a site visit. Area, height, access equipment and roof condition drive the price, so there is no fixed list price.

Areas

South Hampshire and the Solent, including Southampton, Eastleigh, Winchester, Romsey, Fareham, Portsmouth and Havant. The specialist confirms cover by postcode. See all areas.

Free written quote. WhatsApp or email a few photos to quotes@roof-cleaning-hampshire.com and say it’s a metal or profiled roof. Include the postcode and, if you know it, the roof covering. We pass it to our vetted local specialist partner, who first confirms whether the roof is suitable for their method and then replies with a quote.

Call 023 8129 0232  or  Request a Quote

Sources: Tata Steel, Colorcoat inspection and maintenance manual; HSE, Fragile surfaces.

Common Questions

Can you pressure wash a metal roof?

Coating makers advise against it. Tata Steel’s Colorcoat manual says to avoid high-pressure jets and wash with clean water, using a mild detergent only if needed.

How do you clean a profiled steel roof?

Sweep debris off with a soft-bristled brush, clear the gutters, then wash at low pressure with clean water. Sheltered areas such as under eaves and solar panels need cleaning by hand because rain doesn’t reach them.

How often should a metal roof be cleaned?

When dirt or growth is visible, not on a fixed schedule. Tata Steel’s manual advises cleaning when dirt is visibly apparent and keeping records of each clean.

Is it safe to walk on a metal roof?

HSE says roofs should be treated as fragile until a competent person confirms they are not. Rooflights and corroded sheets are common hazards, so work is planned to keep people off fragile areas.

Can you clean moss off a corrugated or fibre-cement roof?

Send photos first. Fibre-cement sheets are often fragile and sheets fitted before 2000 may contain asbestos, which needs a survey before any work.

Do you clean roofs on industrial units and farm buildings?

Send the address, a few photos and access notes. Our vetted specialist partner confirms whether the roof is suitable for their method and quotes in writing if it is.


Related

Concrete tile roofs · Clay tile roofs · Slate roofs · Flat roofs · Metal & profiled roofs · Commercial roof cleaning · Soft wash vs jet wash · Typical costs

Get a Free Fixed-Price Quote

Send a few photos or book a quick site visit. No obligation, no pressure.

Call 023 8129 0232
💬